Latest InfiNet Wireless Base Stations are packaged with the high-power RMM55-10 radio modules. The RMM55-10 radio module full support has appeared since software version "MINTv190.25". The use of older software will lead to unstable device operation.
In order to avoid unexpected situation, please follow the recommendations below:
1) When you receive BS which was ordered in 2016, before installation please check that each CPE has the software version "v190.25" or newer
2) Please pay attention to the SVI interface usage on the BS and CPE to provide management and access
- Options "admin-group" and "local-tag" are not supported starting with version "v190.0"
- In order to get access to the remote devices via the "Management VLAN" (including "native") you should use a separate switching group with the joined SVI interface
NOTE
Please check your configuration before the firmware installation, the reference to the procedure: ftp://ftp.infinet.ru/pub/Firmware/DOC/SVI_document_English.pdf. Additional information can be obtained in the Technical Support Service.
3) "Transient" mode (MIMO compatibility with none-MIMO devices) is no longer guaranteed starting with version "v190.17".
In case of questions or difficulties please do not hesitate to contact the InfiNet Wireless Technical Support Service http://sd.infinetwireless.com.