Figure - IDU-LA-G(V.01) top view
IDU-LA-G(V.01) is an indoor DC/DC injector. It greatly reduces complexity of the deployment in the cases where DC source is available thus reducing both capital expenditures and total cost of ownership.
IDU-LA-G(V.01) may be used for the following purposes:
- To serve as a line protection unit for indoor network equipment connected to the second Ethernet port on ODU
- To connect third-party DC power sources to ODU (for example, to power the unit from solar power or wind power sources).
In both cases IDU-LA-G(V.01) should be properly grounded (please refer to the “Grounding and Lightning Protection” section of this manual).
Figure - IDU-LA-G front panel view
Figure - IDU-LA-G(V.01) inside view
Size 115×65×40 mm (L×W×H)
Figure - Mounting holes sizes
Input voltage supported for InfiNet Wireless models and devices.
| Model | Input voltage, VDC |
|---|---|
R5000-Smn R5000-Lmn AUX-ODU-SYNC | +9…+56 |
R5000-Mmx R5000-Omx R5000-Qmxb InfiLINK XG | ±43…±56 |
Table - Input voltage
CAUTION
Exposing unit to the unsupported voltage will result in irreparable damage to the unit! Always observe power requirements!
IDU-LA-G(V.01) Packing List
| Component | Description |
|---|---|
|
|
|
|
|
|
|
|
Table - IDU-LA-G(V.01) Packing List