Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 36 Next »

Wireless device

The wireless device contains both the radio and networking electronics. Implemented in a robust all-weather metal enclosure, this equipment can be used to create point-to-point wireless links at distances in excess of 5 km (depending on weather conditions, interference, terrain, climate zones, etc.). The wireless device is supplied in the following configuration: integrated lens antenna with an antenna gain 39 dBi.

Gliffy Macro Error

Cannot find a diagram with these parameters:

  • Name: Q70_покраска

Grounding bolt

For grounding the wireless device to the supporting structure.

Interfaces

Quanta 70 has network combo port: gigabit Ethernet and SFP. Only one port can be used for data transmission at a time.

NOTE

Please note, the SFP port has priority in case both ports are enabled.

InterfaceDescription
Gigabit EthernetRJ45 socket for connecting to power supply and network via the PoE power supply. The network connection to the wireless device is made via a 1000BaseT (Gigabit) Ethernet connection. Power is provided to the device over the 1000BaseT Ethernet connection using a standard IEEE 802.3at passive PoE power supply.
SFPExternal optical Gigabit port for plugging of the optical SFP transceiver module.

LEDs

NOTE

Power and wired statuses indication is performed via glassy plug of the cable gland.

LEDStateStatusDescription
RSSINumberRX Signal value

Values on the RSSI LED are displayed in negative (-) dBm. For example, 90 represents a received signal level of -90 dBm. Lower values indicate stronger received signal levels.

— —Wireless link is not established

Gigabit Ethernet

SFP

FlashInitializationThe LEDs on both ports light up with white on second. Then LEDs check is performed: red, blue, green are lightened up sequentially.
FlashLoadingOnly for Gigabit Ethernet port: at the beginning green is lightened a few seconds, on the second loading stage switches to blue.
ON/BluePowerOnly for Gigabit Ethernet port.
ON/RedSpeed 10 MbpsOnly for Gigabit Ethernet port.
ON/YellowSpeed 100 MbpsOnly for Gigabit Ethernet port.
ON/GreenSpeed 1000 Mbps
ON/Green

ERConsole stage

Port with the established link lights up with green, the second port remains blue.
Ethernet Indication

Power Supply

IDU-CPE-G

Figure - IDU-CPE-G

Indoor Gigabit PoE Injector with lightning protection IDU-CPE-G.

ParameterDescription
Size110*40*30 mm (L*W*H)
Weight0,110 kg
Connectors and Interfaces
  • "ETH IN" - Ethernet input (Data only)
  • "ETH OUT" - Ethernet output (Data+VDC), PASSIVE PoE
  • "PWR" - AC Input
Supported Ethernet Modes
  • 10/100/1000Mbps
Input Power Requirements
  • AC Input Voltage: 100 ... 240 VAC
  • AC Input Current: 0.4A @ 100 VAC
  • AC Frequency: 50 to 60 Hz
Consumption
  • 15,4 W (Guaranteed)
Operating temperature range
  • -10 °С ... +50 °С
Operating humidity
  • Maximum 95 %, Non-condensing
Storage temperature
  • -40 °С ... +85 °С
Storage humidity
  • Maximum 95 %, Non-condensing
Output Power Voltage
  • 48 VDC
Ethernet Connectors Pin-out
ETH INETH OUT
PinDescriptionPinDescription
1Data pair A+1Data pair A+
2Data pair A-2Data pair A-
3Data pair B+3Data pair B+
4Data pair C+4+VDC + Data pair C+
5Data pair C-5+VDC + Data pair C-
6Data pair B-6Data pair B-
7Data pair D+7-VDC + Data pair D+
8Data pair D-8-VDC + Data pair D-
Electromagnetic Emission & Immunity
  • FCC Part 15, Class B
  • EN 55022 Class B
  • EN 55024
  • VCCI
Regulatory Compliance
  • RoHS Compliant, WEEE Compliant, CE Energy Efficiency Level VI
Safety
  • UL/IEC/EN 60950-1
Table - IDU-CPE-G Specification

Figure - IDU-CPE-G Front Panel

 

Figure - IDU-CPE-GRear Panel

Lightning protection unit

AUX-ODU-LPU Overview

Figure - AUX-ODU-LPU-G

Optional indoor/outdoor Lightning Protection Unit for Infinet Wireless systems designed to withstand the toughest conditions and protect the outdoor or the indoor unit from sudden power surges induced by lightning strikes. It provides the same level of protection as AUX-ODU-INJ-G. AUX-ODU-LPU-G is compatible with all Infinet Wireless devices.

Despite the fact every Infinet Wireless unit has a built-in lightning protection, AUX-ODU-LPU-G, thanks to its superior GR-1089-grade protection, greatly reduces the risk of replacing damaged devices operating in harsh environments or difficult-to-reach locations.

NOTE

The device is not supplied by default and must be ordered separately.

ParameterDescription
Size and Weight
  • 34x94x121 mm, 0.28 kg
Connectors and Interfaces
  • ETH IN - Ethernet input
  • ETH OUT - Ethernet output (protected leg)
  • GND - Ground clamp
Supported Ethernet Modes
  • 10/100/1000 Mbps (Gigabit Ethernet pass-through)
Water and Dust Protection
  • IP66 and IP67
Operating temperature range
  • -55 °C ... +60 ºC
ETH IN and ETH OUT pin-outPin12345678
Data pairA+A-B+C-C+B-D+D-
Lightning Protection

In compliance with:

  • GR-1089
  • IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact)
  • IEC 61000-4-4 (EFT) 40A (tp = 5/50ns)
  • IEC 61000-4-5 (Lightning) L5, 95A (tp = 8/20us)
  • ETSI ETS 300 386



Table - AUX-ODU-LPU-G Specification

Packing list

AUX-ODU-LPU packing list

Figure - Packing list AUX-ODU-LPU-G

AUX-ODU-LPU-G is supplied with a worm clamp TORRO 40-60/9 C7 W4 DIN 3017 - 2 pcs. The clamp is made of stainless steel A4, width 9 mm, allows the installation on a mast with a diameter of 35 to 60 mm. In case of mast diameter more than 60 mm, a similar clamps (up to a 230 mm diameter) with a width of up to 12-13 mm can be used.

Part number description

Quanta 70 part number has the following structure

Quanta Part Number_1

Structure items are described below

ItemDescription
1Product family name:
  • Q - Quanta.
2Frequency range:
  • 70 - device in the range of 70 GHz.

3
  • 39 - antenna gain, dBi.
  • No labels