The "Traffic Shaping" section allows you to manipulate the data streams going through the device. You can create up to 200 logical channels characterized by different properties (such as priority levels and data transfer rates), and then to assign the data streams to these logical channels according to the special rules, previously created.
In the default configuration, there is no channel created. In order to prioritize the data flows and/or to set the data transfer rates, you have to create the logical channels by clicking the «Add Channel» button:
The following parameters can be configured in the "Traffic Shaping" section for the logical channels:
Logical channel parameter | Description |
---|---|
Channel |
|
Max |
|
PPS |
|
Latency | Set latency value (between 5 ms and 200 ms) for each channel (queue length)
|
Priority |
|
Redirect To |
|
Information |
|
You can delete an existed logical channel by clicking the corresponding «Remove Channel» button.
You can create a traffic shaping rule by clicking the «Add Rule» button.
Traffic shaping rule parameter | Description |
---|---|
Channel |
|
Priority |
|
Direction |
|
Interface |
|
Group |
|
Rule |
|
You can delete an existed traffic shaping rule by clicking the corresponding «Remove Rule» button.