IDU-LA-G(V.01) is an indoor DC/DC injector. It greatly reduces complexity of the deployment in the cases where DC source is available thus reducing both capital expenditures and total cost of ownership.
IDU-LA-G(V.01) may be used for the following purposes:
- To serve as a line protection unit for indoor network equipment connected to the second Ethernet port on ODU.
- To connect third-party DC power sources to ODU (for example, to power the unit from solar power or wind power sources).
In both cases IDU-LA-G(V.01) should be properly grounded (please refer to the “Grounding and Lightning Protection” section of this manual).
Operating temperature range for IDU-LA-G(V.01) is 0 °С ... +40 °С.
Size 115×65×40 mm (L×W×H), weight 0.15kg
Input voltage supported for Infinet Wireless models and devices.
| Input voltage, VDC | Model | |||||||
|---|---|---|---|---|---|---|---|---|
+9…+56 | R5000-Smn | R5000-Lmn | R5000-Smnb | R5000-Smnc | R5000-Lmnc | |||
| ±43…±56 | R5000-Mmx | R5000-Omx | R5000-Mmxb | R5000-Omxb | R5000-Qmxb | Um | Xm | AUX-ODU-SYNC |
CAUTION
Exposing unit to the unsupported voltage will result in irreparable damage to the unit! Always observe power requirements!
IDU-LA-G(V.01) Packing List
| Component | Description |
|---|---|
|
|
|
|
|
|
|
|
