In order to start wireless devices monitoring by InfiMONITOR it is necessary to add them to the system, first. There are two methods:
Please note, before adding devices to the system SNMP parameter must be enabled on them. This process is described in the section "SNMP configuration". |
InfiMONITOR performs automatic devices search via the MINT technology (see Description and working principles of InfiMONITOR). By default, the automatic search function is enabled, to check it, proceed to the section "Settings" -> "Discovering".
In order to disable the automatic devices search and addition function, click the "Disable Auto-Discovering" button. It possible to re-enable at any time.
In order to add the devices go to the section "Settings" -> "Devices". Here is the list of all devices added earlier with the following parameters:
Status - the current host status. There are the following possible options:
In order to add devices click the "Add host" button, the window with the following fields will appear:
Сlick the "Create" button аfter filling all the fields.
The device would not be added instantly, only after its polling. The procedure to add the device consist from the following steps:
After a short period of time InfiMONITOR will start the device polling
To see the pending devices click the "Pending hosts" button
If the device is pending for a long time, it can indicate the authentication credentials are incorrectl and/or the SNMP server has not been started on the device. Check the settings and correct them if necessary. |
InfiMONITOR automatically defines wireless links between the devices therefore there is no need for their manual addition.