Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Center
Scroll Title
titleUnit parameters description
Wireless link identificator used to avoid connecting a unit to a wrong peer if there are several co-located units using the same
ParameterDescription
Device NamenameThe arbitrary wireless unit name which will be used by network administrators for unit identification. It will be shown in Web GUI side panel.Link ID
frequency. Specify different ID values for different links. Both ends of the same link must have the same ID.
Center
Center
Scroll Title
titleFigure - Unit parameters

Image Removed

Regulatory domain

Regulatory domain automatically limits the wireless device operation which is may be needed to meet the local law requirements. Each regulatory domain may limits the following parameters:

  • Range of available center frequencies
  • Requirement of use LBT (Listen Before Talk) technique.
  • Maximum EIRP (Equivalent Isotropically Radiated Power) value.
  • Requirement of use radar detection technique.
Center
Scroll Title
titleFigure - Regulatory domain settings

Image Removed

Image Added

SNTP

Starts the SNTP time synchronization service. For proper operation, specify the SNTP server time zone and the IP address first. By default, the SNTP service is disabled.

Center
Scroll Title
titleSNTP parameters description
ParameterDescription
SNTP Server Addressserver address
The SNTP server IP address, the SNTP service will synchronize the time on the device with. The device must have network access to the SNTP server.
Time Zonezone

The time zone at the place of device installation. For example: GMT + 5.

Center
Scroll Title
titleFigure - SNTP settings

Syslog

Allows to transmit syslog data to the server using the "syslog" protocol. Specify the syslog server address where data should be transmitted.

Center
Scroll Title
title-alignmentcenter
titleFigure - Syslog configuration

Image Added