Page History

Include Page

	_IW Academy
	_IW Academy

Table of Contents

Introduction

...

Center

Scroll Title

title-alignment	center
title	InfiLINK Evolution / InfiMAN Evolution with InfiLINK 2x2 / InfiMAN 2x2 comparison

Parameter		InfiLINK 2x2 PRO	InfiLINK 2x2 LITE	InfiLINK Evolution	InfiMAN 2x2		InfiMAN Evolution
		InfiLINK 2x2 PRO	InfiLINK 2x2 LITE	InfiLINK Evolution	Base station	Subscriber Terminal	Base station	Subscriber Terminal
Frequency range, MHz		5 GHz: 4900–6050 6 GHz: 6050–6425	5 GHz: 4900–6050 6 GHz: 6050–6425	5 GHz: 4900–6050 5+6 GHz: 4900–6425	5 GHz: 4900–6050 6 GHz: 6050–6425	5 GHz: 4900–6050 6 GHz: 6050–6425	5 GHz: 4900–6050 6 GHz: 6050–6425	5 GHz: 4900–6050 5+6 GHz: 4900–6425
Channel width, MHz		5, 10, 20, 40	5, 10, 20, 40	5, 10, 20, 40, 80	5, 10, 20, 40		5, 10, 20, 40, 80
Transmit power, dBm		5 GHz: up to 27 6 GHz: up to 23	5 GHz: up to 25 6 GHz: up to 23	5 GHz: up to 25 5+6 GHz: up to 25	5 GHz: up to 27 6 GHz: up to 23	5 GHz: up to 25 6 GHz: up to 23	5 GHz: up to 27 6 GHz: up to 25	5 GHz: up to 25 5+6 GHz: up to 25
Modulation coding schemes		up to QAM64 5/6	up to QAM64 5/6	up to QAM256 5/6	up to QAM64 5/6		up to QAM256 5/6
Throughput, Mbps	40 MHz	up to 280	up to 180	up to 335	up to 250	up to 180	up to 360	up to 335
Throughput, Mbps	Max value	up to 280	до up to 180	up to 670	up to 250	up to 180	up to 800	up to 670
Wired Interfaces		1xGE(RJ45)	1x Fast Ethernet 2x FastEthernet (PoE out)	1xGE(RJ45)	1xGE(RJ45)	1x Fast Ethernet 2x FastEthernet (PoE out)	1xGE(RJ45) 1xSFP 1xSYNC	1xGE(RJ45)
Proprietary technologies		Instant DFS (models with 2 radio modules)		Instant DFS	Instant DFS (models with 2 radio modules) Beamforming		Instant DFS Beamforming	Instant DFS
TDD sync		Via external synchronization hub			Via external synchronization hub		Via external synchronization hub
Multiple access method		CSMA-CA Polling TDMA	CSMA-CA Polling TDMA	TDMA	CSMA-CA Polling TDMA	CSMA-CA Polling TDMA	TDMA	TDMA
Consumption, W		20	15	15	20 35 (R5000-Qmxb)	15	30 35 (E5-BSQ)	15
Power options		90-240 VAC ~ 50/60 Hz ±43..56 VDC Proprietary PoE	90-240 VAC ~ 50/60 Hz +9..56 VDC Proprietary PoE	90-240 VAC ~ 50/60 Hz ±43..56 VDC Proprietary PoE or 802.3at	90-240 VAC ~ 50/60 Hz ±43..56 VDC Proprietary PoE	90-240 VAC ~ 50/60 Hz +9..56 VDC Proprietary PoE	90-240 VAC ~ 50/60 Hz ±43..56 VDC Proprietary PoE or 802.3at	90-240 VAC ~ 50/60 Hz ±43..56 VDC Proprietary PoE or 802.3at

Note
*-Roadmap item.

Limitations

Limitations in device configuration and design must be taken into account during the network upgrade from R5000 series to Evolution, and R5000 with Evolution devices joint operation in one network.

Note

title	NOTE

InfiLINK Evolution / InfiMAN Evolution devices in the “transient” mode are guaranteed to work only with devices based on the H08 and H11 platforms of InfiLINK 2x2 and InfiMAN 2x2 families devices. Work with devices based on other platforms, for example, H05, H06 and H07 is not guaranteed.

Configuration Settings

Firmware version

...

Scrambling mode is not supported on InfiLINK Evolution / InfiMAN Evolution devices. Scrambling mode must be disabled on R5000 devices, otherwise the data corruption process will be observed in the wireless link.

misoctl mode

The misoctl mode is not supported on InfiLINK Evolution / InfiMAN Evolution devices. The misoctl mode must be disabled on the R5000 devices, otherwise the data transmitted from the R5000 in the MISO mode will be processed incorrectly on the Evolution side. This may lead to incorrect radio parameter calculations.

Bitrate TXInfiLINK Bitrate TX
- InfiLINK 2x2 / InfiMAN 2x2: 30000, 60000, 90000, 120000, 180000, 240000, 270000, 300000 (Kbps).
- InfiLINK Evolution / InfiMAN Evolution: 65000, 130000, 195000, 260000, 390000, 520000, 585000, 650000, 780000, 866700 (Kbps).

...

PoE-out mode is supported only on InfiLINK 2x2 LITE and InfiMAN 2x2 subscriber terminals.

IDU-CPE-DC power supply

The IDU-CPE-DC power supply can be used to power only the InfiLINK 2x2 LITE and InfiMAN 2x2 subscriber terminals.

CAB-SYNC cable

To connect the AUX-ODU-SYNC device to wireless devices, specialized cables must be used:

...

Expand

title	Scenarios: R5000 - Master, InfiLINK Evolution - Slave

Center

Scroll Title

title-alignment	center
title	Connection scheme

Center

Scroll Title

title-alignment	center
title	Settings parameters

R5000-Lmn сonfiguration		E-ST сonfiguration
Radio	Switching	Radio	Switching
Type: Master. Frame Size: 5 ms. Channel width: 20 MHz. Frequency: 5800 MHz. Greenfield: disable misoctl: disable Scrambling: disable Network SID: 10101010. Security Key: 456123.	Switch#3: Data transmission Switch#100: Management in VLAN 100	Type:Slave. R5000 Compatibility mode: enableon Channel width: 20 MHz. Frequency: 5800 MHz. Network SID: 10101010. Security Key: 456123.	Switch#3: Data transmission Switch#100: Management in VLAN 100

Settings via the web interface

R5000-Lmn settings

Step 1: Upgrade to the latest TDMA firmware version. Procedure are provided in the section "Maintenance menu".
Step 2: Check the parameters disabling:
- Greenfield
- misoctl
- Scrambling.
The rest radio parameters and switching settings remain unchanged.

E-ST settings

Step 1: Обновите до последней версию ПО. Инструкция по обновлению ПО представлена в разделе "ОбслуживаниеUpgrade to the latest firmware version. Procedure are provided in the section "Maintenance menu⁣".
Step 2: В разделе "Основные настройкиSet the radio parameters values in the section" Basic settings " → "Настройки линка" установите значения параметров RadioLink Settings".

Center

Scroll Title

title-alignment	center
title	Настройки линка E-ST link settings

Image RemovedImage Added

Step 3: В разделе "Основные настройкиIn the section "Basic settings" → " Коммутатор Switch (MAC Switch) настройте коммутацию согласно требованиям таблицы выше и примените настройки, configure the switching according to the table above requirements and apply the settings.

Center

Scroll Title

title-alignment	center
title	Настройки коммутации E-ST switching settings

Image RemovedImage Added

Center

Scroll Title

title-alignment	center
title	Настройки сети E-ST network settings

Image RemovedImage Added

Step 4: В разделе "Основные настройкиIn the section" Basic settings " → "Статистика линков для интерфейса Link Statistics on rf6.0" проверьте статистику беспроводного соединения. Подробное описание значений параметров представлено в разделе "Состояние устройства", check the wireless connection statistics. A detailed description of the parameter values is provided in the "Device Status" section.

Center

Image Removed

Scroll Title

title-alignment	center
title	Статистика беспроводного соединения

Wireless connection statistics

Image Added

Settings via the CLI

Настройки R5000-Lmn settings

Step 1: Обновите до последней версию ПО с поддержкой технологии TDMA. Инструкция по обновлению ПО представлена в разделе "Общие команды Upgrade to the latest TDMA firmware version. Procedure are provided in the section "General Purpose Command Set" → "flashnet".
Step 2: Check the parameters disabling:
- Greenfieldmisoctl
- Scrambling.
Остальные The rest radio parameters and switching settings remain unchanged.

Настройки E-ST settings

Step 1: Обновите до последней версию ПО. Инструкция по обновлению ПО представлена в разделе "Общие команды Upgrade to the latest firmware version. Procedure are provided in the section "General Purpose Command Set" → "flashnet".
Step 2: Configure the radio parameters and switching.

Code Block

language	text
theme	Emacs
title	E-ST: Настройки радио и коммутацииradio and switching settings

rf rf6.0 band 20 transient
rf rf6.0 freq 5800 bitr max sid 10101010
mint rf6.0 -name "E5-STE1"
mint rf6.0 -type slave
mint rf6.0 prof 1 -band 20 -freq 5800 -sid 10101010 -type slave -autobitr -key "456123"
ifc svi100 up
ifc vlan100 vlan 100 vlandev eth0 up
switch group 100 add 2 vlan100 rf6.0
svi 100 group 100
ifc svi100 192.168.98.27/24
switch group 100 start
switch group 3 add 1 eth0 rf6.0
switch group 3 start

Step 3: Проверьте статистику беспроводного соединения командой Check the wireless connection statistics with the command "mint map stat". Выполните тестирование Radioканала командой Perform the radio link test with the command "ltest".

Code Block

language	text
theme	Emacs
title	E-ST: Статистика беспроводного соединенияWireless connection statistics

E5-STE1#1> mint map stat
==============================================================================
Interface rf6.0  TDS
Node  000435152615  "E5-STE1", Id 37429, Nid 0, (Slave)
Freq 5800, Band 20, Sid 10101010, autoBitrate 156000/13000, Noise -100(+0)

 ------- ---------------------------- ------------ -----  ------- ----- -------
   Id         Name                        Node      SNR   Bitrate Retry Options
 ------------------------------------ ------------ rx/tx   rx/tx  rx/tx -------
   03270 R5000-Lmn1                   00043522CBE6 46/38  130/130  0/0  /TM/
 ------- ---------------------------- ------------ -----  ------- ----- -------
 1 active neighbors
 Total load: 8/7 (rx/tx), 15 (sum) Kbps
 Total nodes in area: 2

Step 4: Save configuration.

Code Block

language	text
theme	Emacs
title	E-ST: Сохранение настроекSave settings

E5-STE1#1> сo sa

Expand

title	СценарийScenarios: R5000 - ВедомоеSlave, InfiLINK Evolution - ВедущееMaster

Center

Scroll Title

title-alignment	center
title	Connection scheme

Image RemovedImage Added

Center

Scroll Title

title-alignment	center
title	Параметры устройствSettings parameters

configuration R5000-Lmn configuration		configuration E-ST configuration
Radio	Switching	Radio	Switching
Type:Slave. Channel width: 40 MHz. Frequency: 5500 MHz. Greenfield: disable misoctl: disable Scrambling: disable Network SID: 10101011. Security Key: 123456.	Switch#6: Data transmission Switch#150: Management in VLAN 150	Type: Master. R5000 Compatibility mode: enableon Frame Size: 5 ms. Channel width: 40 MHz. Frequency: 5500 MHz. Network SID: 10101011. Security Key: 123456.	Switch#6: Data transmission Switch#150: Management in VLAN 150

Settings via the web interface

Настройки R5000-Lmn settings

Step 1: Обновите до последней версию ПО с поддержкой технологии TDMA. Инструкция по обновлению ПО представлена в разделе "Обслуживание Upgrade to the latest TDMA firmware version. Procedure are provided in the section "Maintenance menu".
Step 2: Check the parameters disabling:
- Greenfieldmisoctl
- Scrambling.
Параметры Radio и настройка коммутации остаются без изменений согласно таблицы выше.

Настройки

The rest radio parameters and switching settings remain unchanged.

E-ST settings

Step 1: Обновите до последней версию ПО. Инструкция по обновлению ПО представлена в разделе "Обслуживание Upgrade to the latest firmware version. Procedure are provided in the section "Maintenance menu⁣".
Step 2: В разделе "Основные настройкиSet the radio parameters values in the section" Basic settings " → "Настройки линка" установите значения параметров RadioLink Settings".

Center

Scroll Title

title-alignment	center
title	Настройки линка E-STST link settings

Image RemovedImage Added

Step 3: В разделе "Основные настройкиIn the section "Basic settings" → " Коммутатор Switch (MAC Switch) настройте коммутацию согласно требованиям таблицы выше и примените настройки, configure the switching according to the table above requirements and apply the settings.

Center

Scroll Title

title-alignment	center
title	Настройки коммутации E-ST switching settings

Image RemovedImage Added

Center

Scroll Title

title-alignment	center
title	Настройки сети E-ST network settings

Image RemovedImage Added

Step 4: В разделе "Основные настройкиIn the section" Basic settings " → "Статистика линков для интерфейса Link Statistics on rf6.0" проверьте статистику беспроводного соединения. Подробное описание значений параметров представлено в разделе "Состояние устройства", check the wireless connection statistics. A detailed description of the parameter values is provided in the "Device Status" section.

Center

Image Removed

Scroll Title

title-alignment	center
title	Статистика беспроводного соединения

Wireless connection statistics

Image Added

Settings via the CLI

Настройки R5000-Lmn settings

Step 1: Обновите до последней версию ПО с поддержкой технологии TDMA. Инструкция по обновлению ПО представлена в разделе "Общие команды Upgrade to the latest TDMA firmware version. Procedure are provided in the section "General Purpose Command Set" → "flashnet".
Step 2: Check the parameters disabling:
- Greenfieldmisoctl
- Scrambling.
The radio parameters and switching settings remain unchanged.

Настройки E-ST settings

Step 1: Обновите до последней версию ПО. Инструкция по обновлению ПО представлена в разделе "Общие команды Upgrade to the latest firmware version. Procedure are provided in the section "General Purpose Command Set" → "flashnet".
Step 2: Configure the radio parameters and switching.

Code Block

language	text
theme	Emacs
title	E-ST: Настройки радио и коммутацииradio and switching settings

rf rf6.0 band 40 transient
rf rf6.0 freq 5500 bitr max sid 10101011
mint rf6.0 -name "E5-STE2"
mint rf6.0 -type master
mint rf6.0 -key "123456"
mint rf6.0 -autobitrate
mint rf6.0 -roaming leader
mint rf6.0 tdma mode=Master win=5
ifc svi150 up
ifc vlan150 vlan 150 vlandev eth0 up
switch group 150 add 2 vlan150 rf6.0
svi 150 group 150
ifc svi100 192.168.98.28/24
switch group 150 start
switch group 6 add 1 eth0 rf6.0
switch group 6 start

Step 3: Проверьте статистику беспроводного соединения командой Check the wireless connection statistics with the command "mint map stat". Выполните тестирование Radioканала командой Perform the radio link test with the command "ltest".

Code Block

language	text
theme	Emacs
title	E-ST: Статистика беспроводного соединенияWireless connection statistics

E5-STE1#1> mint map stat
==============================================================================
Interface rf6.0  TDS
Node  000435152615  "E5-STE1", Id 37429, Nid 0, (Slave)
Freq 5800, Band 20, Sid 10101010, autoBitrate 156000/13000, Noise -100(+0)

 ------- ---------------------------- ------------ -----  ------- ----- -------
   Id         Name                        Node      SNR   Bitrate Retry Options
 ------------------------------------ ------------ rx/tx   rx/tx  rx/tx -------
   03270 R5000-Lmn1                   00043522CBE6 46/38  130/130  0/0  /TM/
 ------- ---------------------------- ------------ -----  ------- ----- -------
 1 active neighbors
 Total load: 8/7 (rx/tx), 15 (sum) Kbps
 Total nodes in area: 2

Step 4: Save configuration.

Code Block

language	text
theme	Emacs
title	E-ST: Сохранение настроекSave settings

E5-STE1#1> co sa

Топология "точка-многоточка"

Для увеличения пропускной способности сети рекомендуем:

Заменить сектор базовой станции в соответствии с рекомендациями таблицы в разделе "Соответствие моделей R5000 и Evolution".
Заменить критически важные абонентские терминалы.

...

Point-to-Multipoint topology

To increase the network throughput, we recommend:

Replace the base station sector in accordance with the recommendations of the table in the section "R5000 and Evolution models compliance".
Replace critical subscriber terminals.

Example of upgrading a Point-to-Multipoint network topology

Expand

title	СценарийScenarios: E-BS - сектор базовой станцииbase station sector; R5000 и and E-ST - абонентские терминалы subscriber terminals

Center

Scroll Title

title-alignment	center
title	Connection scheme

Image RemovedImage Added

Center

Scroll Title

title-alignment	center
title	Параметры устройствSettings parameters

configuration E-BS configuration		configuration R5000-Lmn configuration		configuration E-ST configuration
Radio	Switching	Radio	Switching	Radio	Switching
Type: Master. R5000 Compatibility mode: enableon Frame Size: 5 ms. Channel width: 40 MHz. Frequency: 5310 MHz. Network SID: 10101010. Security Key: 456123.	Switch#5: Data transmission в выделенном VLAN 10 Switch#100: Management in VLAN 100	Type:Slave. Channel width: 40 MHz. Frequency: 5310 MHz. Greenfield: disablemisoctl: disable Scrambling: disable Network SID: 10101010. Security Key: 456123.	Switch#5: Data transmission в выделенном in VLAN 10 Switch#100: Management in VLAN 100	Type:Slave. R5000 Compatibility mode: enableon Channel width: 40 MHz. Frequency: 5310 MHz. Network SID: 10101010. Security Key: 456123.	Switch#5: Data transmission в выделенном in VLAN 10 Switch#100: Management in VLAN 100

Settings via the web interface

Настройки R5000-Lmn settings

Step 1: Обновите до последней версию ПО с поддержкой технологии TDMA. Инструкция по обновлению ПО представлена в разделе "Обслуживание Upgrade to the latest TDMA firmware version. Procedure are provided in the section "Maintenance menu".
Step 2: Check the parameters disabling:
- Greenfield
- misoctl
- Scrambling.
The radio parameters and switching settings remain unchanged.

Настройки E-BS settings

Step 1: Обновите до последней версию ПО. Инструкция по обновлению ПО представлена в разделе "Обслуживание Upgrade to the latest firmware version. Procedure are provided in the section "Maintenance menu⁣".
Step 2: В разделе "Основные настройкиSet the radio parameters values in the section" Basic settings " → "Настройки линка" установите значения параметров RadioLink Settings".

Center

Scroll Title

title-alignment	center
title	Настройки линка E-BS link settings

Image RemovedImage Added

Step 3: В разделе "Основные настройкиIn the section "Basic settings" → " Коммутатор Switch (MAC Switch) настройте коммутацию согласно требованиям таблицы выше и примените настройки, configure the switching according to the table above requirements and apply the settings.

Center

Scroll Title

title-alignment	center
title	Настройки коммутации E-BS switching settings

Image RemovedImage Added

Center

Scroll Title

title-alignment	center
title	Настройки сети E-BS network settings

Image RemovedImage Added

Step 4: В разделе "Основные настройкиIn the section" Basic settings " → "Статистика линков для интерфейса Link Statistics on rf6.0" проверьте статистику беспроводного соединения. Подробное описание значений параметров представлено в разделе "Состояние устройства", check the wireless connection statistics. A detailed description of the parameter values is provided in the "Device Status" section.

Center

Image Removed

Scroll Title

title-alignment	center
title	Статистика беспроводного соединения

Wireless connection statistics

Image Added

Note

title	NOTE

Perform the E-ST settings analog with E-BS.

Settings via the CLI

Настройки R5000-Lmn settings

Step 1: Обновите до последней версию ПО с поддержкой технологии TDMA. Инструкция по обновлению ПО представлена в разделе "Общие команды Upgrade to the latest TDMA firmware version. Procedure are provided in the section "General Purpose Command Set" → "flashnet".
Step 2: Check the parameters disabling:
- Greenfieldmisoctl
- Scrambling.
The radio parameters and switching settings remain unchanged.

Настройки E-BS settings

Step 1: Обновите до последней версию ПО. Инструкция по обновлению ПО представлена в разделе "Общие команды Upgrade to the latest firmware version. Procedure are provided in the section "General Purpose Command Set" → "flashnet".
Step 2: Configure the radio parameters and switching.

Code Block

language	text
theme	Emacs
title	E-BS: Настройки радио и коммутацииRadio and switching settings

rf rf6.0 band 40 transient
rf rf6.0 freq 5310 bitr max sid 10101010
mint rf6.0 -name "E5-BSE"
mint rf6.0 -type master
mint rf6.0 -key "456123"
mint rf6.0 -autobitrate
mint rf6.0 -roaming leader
mint rf6.0 tdma mode=Master win=5 
ifc svi100 up
ifc vlan100 vlan 100 vlandev eth0 up
switch group 100 add 2 vlan100 rf6.0
svi 100 group 100
ifc svi100 192.168.98.25/24
switch group 100 start
switch group 5 add 1 eth0 rf6.0
switch group 5 vlan 10
switch group 5 start

Step 3: Проверьте статистику беспроводного соединения командой Check the wireless connection statistics with the command "mint map stat". Выполните тестирование Radioканала командой Perform the radio link test with the command "ltest".

Code Block

language	text
theme	Emacs
title	E-BS: Статистика беспроводного соединенияWireless connection statistics

E5-BSE#1> mint map stat
==============================================================================
Interface rf6.0  TDM (5 ms DL/UL:Auto) (RSSI=-40 Dist=70)
Node  000435252611  "E5-BSE", Id 37425, Nid 0, (Master)
Freq 5310, Band 40, Sid 10101010, autoBitrate 400000/30000, Noise -100(+0)

 ------- ---------------------------- ------------ -----  ------- ----- -------
   Id         Name                        Node      SNR   Bitrate Retry Options
 ------------------------------------ ------------ rx/tx   rx/tx  rx/tx -------
   03286 R5000-Lmn                    00043522CBF6 47/42  300/300  0/0  /S/
   37428 E5-STE2                      000435152614 47/48  300/300  0/0  /S/
 ------- ---------------------------- ------------ -----  ------- ----- -------
 2 active neighbors
 Total load: 9/11 (rx/tx), 20 (sum) Kbps
 Total nodes in area: 3
 Links fault 2, Routes fault 0
 # Optimal tdma distance 2 km

Step 4: Save configuration.

Code Block

language	text
theme	Emacs
title	E-BS: Сохранение настроекSave settings

E5-BSE#1> co sa

Note

title	NOTE

Perform the E-ST settings analog with E-BS.

Expand

title	Сценарий Scenarios: R5000 - сектор базовой станцииbase station sector, R5000 и and E-ST - абонентские терминалыsubscriber terminals

Center

Scroll Title

title-alignment	center
title	Connection scheme

Image RemovedImage Added

Center

Scroll Title

title-alignment	center
title	Settings parameters

configuration R5000-Mmx configuration		configuration R5000-Lmn configuration		configuration E-ST configuration
Radio	Switching	Radio	Switching	Radio	Switching
Type: Master. Frame Size: 5 ms. Channel width: 20 MHz. Frequency: 5100 MHz. Greenfield: disable misoctl: disable Scrambling: disable Network SID: 10101011. Security Key: 123456.	Switch#7: Data transmission Switch#200: Management in VLAN 200	Type: Slave. Channel width: 20 MHz. Frequency: 5100 MHz. Greenfield: disable misoctl: disable Scrambling: disable Network SID: 10101011. Security Key: 123456.	Switch#7: Data transmission Switch#200: Management in VLAN 200	Type:Slave. R5000 Compatibility mode: enableon Channel width: 20 MHz. Frequency: 5100 MHz. Network SID: 10101011. Security Key: 123456.	Switch#7: Data transmission Switch#200: Management in VLAN 20020

Settings via the web interface

Настройки R5000-Mmx, R5000-Lmn settings

Step 1: Обновите до последней версию ПО с поддержкой технологии TDMA. Инструкция по обновлению ПО представлена в разделе "Обслуживание Upgrade to the latest TDMA firmware version. Procedure are provided in the section "Maintenance menu".
Step 2: Check the parameters disabling:
- Greenfieldmisoctl
- Scrambling.
The radio parameters and switching settings remain unchanged.

Настройки E-ST settings

Step 1: Обновите до последней версию ПО. Инструкция по обновлению ПО представлена в разделе "Обслуживание Upgrade to the latest firmware version. Procedure are provided in the section "Maintenance menu⁣".
Step 2: В разделе "Основные настройкиSet the radio parameters values in the section" Basic settings " → "Настройки линка" установите значения параметров RadioLink Settings".

Center

Scroll Title

title-alignment	center
title	Настройки линка E-ST link settings

Image RemovedImage Added

Step 3: В разделе "Основные настройкиIn the section "Basic settings" → " Коммутатор Switch (MAC Switch) настройте коммутацию согласно требованиям таблицы выше и примените настройки, configure the switching according to the table above requirements and apply the settings.

Center

Scroll Title

title-alignment	center
title	Настройки коммутации E-ST switching settings

Image RemovedImage Added

Center

Scroll Title

title	Настройки сети E-ST network settings

Image RemovedImage Added

Step 4: В разделе "Основные настройкиIn the section" Basic settings " → "Статистика линков для интерфейса Link Statistics on rf6.0" проверьте статистику беспроводного соединения. Подробное описание значений параметров представлено в разделе "Состояние устройства", check the wireless connection statistics. A detailed description of the parameter values is provided in the "Device Status" section.

Center

Image Removed

Scroll Title

title-alignment	center
title	Статистика беспроводного соединения

Wireless connection statistics

Image Added

Settings via the CLI

Настройки R5000-Mmx, R5000-Lmn settings

Step 1: Обновите до последней версию ПО с поддержкой технологии TDMA. Инструкция по обновлению ПО представлена в разделе "Общие команды Upgrade to the latest TDMA firmware version. Procedure are provided in the section "General Purpose Command Set" → "flashnet".
Step 2: Check the parameters disabling:
- Greenfieldmisoctl
- Scrambling.
The radio parameters and switching settings remain unchanged.

Настройки E-ST settings

Step 1: Обновите до последней версию ПО. Инструкция по обновлению ПО представлена в разделе "Общие команды Upgrade to the latest firmware version. Procedure are provided in the section "General Purpose Command Set" → "flashnet".
Step 2: Configure the radio parameters and switching.

Code Block

language	text
theme	Emacs
title	E-ST: Настройки радио и коммутацииradio and switching settings

rf rf6.0 band 20 transient
rf rf6.0 freq 5100 bitr max sid 10101011
mint rf6.0 -name "E5-STE_Slave1"
mint rf6.0 -type slave
mint rf6.0 prof 1 -band 20 -freq 5100 -sid 10101011 -type slave -autobitr -key "123456"
ifc svi200 up
ifc vlan200 vlan 200 vlandev eth0 up
switch group 200 add 2 vlan200 rf6.0
svi 200 group 200
ifc svi100 192.168.98.25/24
switch group 200 start
switch group 7 add 1 eth0 rf6.0
switch group 7 start

Step 3: Проверьте статистику беспроводного соединения командой Check the wireless connection statistics with the command "mint map stat". Выполните тестирование Radioканала командой Perform the radio link test with the command "ltest".

Code Block

language	text
theme	Emacs
title	E-BS: Статистика беспроводного соединенияST: Wireless connection statistics

E5-STE1#1> mint map stat
==============================================================================
Interface rf6.0  TDS
Node  000435152615  "E5-STE_Slave1", Id 37429, Nid 0, (Slave)
Freq 5100, Band 20, Sid 10101011, autoBitrate 156000/13000, Noise -103(+0)

 ------- ---------------------------- ------------ -----  ------- ----- -------
   Id         Name                        Node      SNR   Bitrate Retry Options
 ------------------------------------ ------------ rx/tx   rx/tx  rx/tx -------
   13660 R5000-Mmx                    00043514C93C 53/44  130/130  0/0  /TM/F
 ------- ---------------------------- ------------ -----  ------- ----- -------
 1 active neighbors
 Total load: 5/0 (rx/tx), 5 (sum) Kbps
 Total nodes in area: 3

Step 4: Save configuration.

Code Block

language	text
theme	Emacs
title	E-BSST: Сохранение настроекSave settings

E5-STE1#1> co sa

Page tree

Versions Compared

Old Version 2

New Version Current

Key

Introduction

Limitations

Configuration Settings

Топология "точка-многоточка"

Point-to-Multipoint topology