...
When Channel Type is set to “Single”, then Tx and/or Rx of Chain #1 (for horizontal polarization antenna) can be deactivated:
- "Chain #0" is connected to the port of the vertical polarized integrated antenna
"Chain #1" is connected to the port of the horizontal polarized integrated antenna
| Warning | ||
|---|---|---|
| ||
Please note, the connectorized models have different the vertical and horizontal polarization correspondence to Chain #0 and Chain #1 channels. For E5-BSE, E6-BSE, E5-STE and E6-STE devices:
|
| Center | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
If the "Single" mode is selected when, then "Chain #1" column (horizontal polarization) can be disabled for transmission (TX) and / or reception (RX):
...
The data streams are transmitted over Chain #0 (corresponding to vertical polarization) only, lowering the performance of the link, but increasing the link distance (transmitter operates with one antenna as does the receiver; there is no diversity and no additional processing for recomposing the Rx signal):
...