Wireless device
An integrated wireless device contains the radio and networking electronics. Implemented in a robust all-weather metal enclosure, this equipment can be used to create point-to-point wireless links at distances in excess of 5 km (depending on weather conditions, interference, terrain, climate zones, etc.). The following lens-type integrated antenna with an antenna gain 39 dBi is available.
Grounding bolt
For grounding the ODU to the supporting structure.
Wired interfaces
RJ45 socket for connecting to power supply and network via the PoE power supply. The network connection to the ODU is made via a 1000BaseT (Gigabit) Ethernet connection. Power is provided to the ODU over the 1000BaseT Ethernet connection using a standard IEEE 802.3at passive PoE power supply.
An external optical Gigabit port for plugging of the optical SFP transceiver module.
LED Panel
Power status, wired and wireless status, RSSI value indication PWR - power indicators will light red when the device is connected to a power source, yellow when 10/100 Mbps wired connection appears and green when 1000 Mbps wired connection appears. Other indicators are used to perform coarse antenna alignment. The more indicators are on, the better wireless connection is established. The blinking indicator means an intermediate state. The more often the indicator blinks the higher level connection is established.
Power Supply
Indoor Gigabit PoE Injector with lightning protection IDU-CPE-G.
Parameter | Description | ||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | 110*40*30 mm (L*W*H) | ||||||||||||||||||||||||||||||||||||||||
Weight | 0,110 kg | ||||||||||||||||||||||||||||||||||||||||
Connectors and Interfaces |
| ||||||||||||||||||||||||||||||||||||||||
Supported Ethernet Modes |
| ||||||||||||||||||||||||||||||||||||||||
Input Power Requirements |
| ||||||||||||||||||||||||||||||||||||||||
Consumption |
| ||||||||||||||||||||||||||||||||||||||||
Operating temperature range |
| ||||||||||||||||||||||||||||||||||||||||
Operating humidity |
| ||||||||||||||||||||||||||||||||||||||||
Storage temperature |
| ||||||||||||||||||||||||||||||||||||||||
Storage humidity |
| ||||||||||||||||||||||||||||||||||||||||
Output Power Voltage |
| ||||||||||||||||||||||||||||||||||||||||
Ethernet Connectors Pin-out |
| ||||||||||||||||||||||||||||||||||||||||
Electromagnetic Emission & Immunity |
| ||||||||||||||||||||||||||||||||||||||||
Regulatory Compliance |
| ||||||||||||||||||||||||||||||||||||||||
Safety |
|
Lightning protection unit
Optional indoor/outdoor Lightning Protection Unit for Infinet Wireless systems designed to withstand the toughest conditions and protect the outdoor or the indoor unit from sudden power surges induced by lightning strikes. It provides the same level of protection as AUX-ODU-INJ-G. AUX-ODU-LPU-G is compatible with all Infinet Wireless devices.
Despite the fact every Infinet Wireless unit has a built-in lightning protection, AUX-ODU-LPU-G, thanks to its superior GR-1089-grade protection, greatly reduces the risk of replacing damaged devices operating in harsh environments or difficult-to-reach locations.
NOTE
The device is not supplied by default and must be ordered separately.
Parameter | Description | ||||||||
---|---|---|---|---|---|---|---|---|---|
Size and Weight |
| ||||||||
Connectors and Interfaces |
| ||||||||
Supported Ethernet Modes |
| ||||||||
Water and Dust Protection |
| ||||||||
Operating temperature range |
| ||||||||
ETH IN and ETH OUT pin-out | Pin | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Data pair | A+ | A- | B+ | C- | C+ | B- | D+ | D- | |
Lightning Protection | In compliance with:
|
Packing list
AUX-ODU-LPU-G is supplied with a worm clamp TORRO 40-60/9 C7 W4 DIN 3017 - 2 pcs. The clamp is made of stainless steel A4, width 9 mm, allows the installation on a mast with a diameter of 35 to 60 mm. In case of mast diameter more than 60 mm, a similar clamps (up to a 230 mm diameter) with a width of up to 12-13 mm can be used.
Part number description
Quanta 70 part number has the following structure
Structure items are described below
Item | Description |
---|---|
1 | Product family name:
|
2 | Frequency range:
|
3 |
|